| ALUMINIUM GRILL ROLLING SHUTTER
|
SPECIFICATION
TYPE-I
1.The grill rolling shutters slats are, aluminum pipe with flat
2.The aluminum grill shutter slats are width 100 and 70 mm
3.The aluminum grill shutter slats are thick 0.7mm to1.5mm
4.The aluminum grill shutters slats are 90%, 70%, 50% vision type holes available
5.The aluminum grill shutters slats are make it useful for both commercial, industrial warehouses and shops.
6.Manual Chain and Motor operation available
7.The aluminum grill shutter aluminum track, thick 2.0 mm
8.The aluminum grill shutters slats are the plastic end locks
9.The aluminum grill shutters Bottom rail with rubber is made up of aluminum and steel available
10.The aluminum grill shutters Bottom rail width 3/4/5cm, height10/12cm & thick 2/3 mm.
11.The aluminum grill shutters, side plate of galvanized steel and available thick of 3mm, 4 mm and 5mm.
12.The aluminum grill shutters side galvanized steel track available thick of 2&3mm size of 40/40- 50/40 cm.
13.The aluminum grill shutters, shaft is galvanized steel pipe.
14.The aluminum grill shutters, all colors available
15.All type of center motors and side motors are available
16.Make ?Malaysia, Italy , French, Taiwan and Uae
17.Weight of motor available ?300kg to1200kg
|
|
| |
| |
| |
|
|
